Hi Mike,

please take a look at
www.pilotaware.com

Thx
Lee

Hallo Lee

I would be interested in some details.

Curious

Mike

Hi all

I have this all working on a raspi adsb to skydemon, please contact me for details

moorel at ntlworld dot com

Thx
Lee

OK its more than a RasPi would cost but PFLARM core with wifi connect to skydemon also displays Mode S and FLARM (gliders) traffic as well as ADS-B.

I find seeing the gliders the most useful.


Europa farm strip flyer, Bedfordshire, UK

Everything you need to know is in the document you linked to above (for connectivity) and in the PowerFLARM manual (for protocol).

Don't underestimate my warning earlier though about the massive amounts of RF interference both the RasPi and the DVB-T dongle generate. Neither device belongs in an aircraft!

Hi all, I'm new to the forum and am in the process of developing something similar to that described above.

I am essentially trying to emulate the service interface described here http://www.air-avionics.com/support/B104002.pdf to send ads-b positional information from raspberry pi to skydemon using the existing Flarm interface.

I was just wondering if Wobblewing had made any progress? Or if any users have any further insight into this, other than what has already been discussed!

Many thanks, James

The FUNCube dongle is very interesting as well http://www.funcubedongle.com/?page_id=1073
Apparently the Pi (though perhaps not the newer version) has capability issues with the amount of data is can deal with.
Would love to see someting like this come to fruition. A while ago (before the son arrived!) i had acquired a Pi and FUNcube (the original version) with the intention of coming up with a device that uses GPS signals "validated" (within the tolerance of such old equipment) by VORs etc.

There are a couple of ADS-B receiver apps in the Android Play Store. DVB-T dongle hasn't arrived yet so haven't tried out but looks like feeds position data to mapping app.
Chris

Hi All

According the ot butterfly connect it seems to be running a service on
ipaddr 192.168.1.1
port 2000
Is this what skydemon attempts to connect to ?

Thx
Lee

We have no SkyDemon documentation related to this topic.